R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

32
[Sysname] user-interface console 0
[Sysname-ui-console0] speed 19200
stopbits
Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
View
User interface view
Default level
2: System level
Parameters
1: One stop bit.
1.5: One and a half stop bits.
2: Two stop bits.
Description
Use stopbits to set the number of stop bits transmitted per byte.
Use undo stopbits to restore the default.
By default, the stop bit is one.
NOTE:
• The command is only applicable to the console port.
• The stop bits setting must be the identical for the user interfaces of the connectin
g
ports on the device and
the target device for communication.
Examples
# Set the stop bits on the console user interface to 1.5.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0] stopbits 1.5
telnet
Syntax
telnet remote-host [ service-port ] [ vpn-instance vpn-instance-name ] [ source { interface interface-type
interface-number | ip ip-address } ]
View
User view
Default level
0: Visit level