R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

35
telnet server enable
Syntax
telnet server enable
undo telnet server enable
View
System view
Default level
3: Manage level
Parameters
None
Description
Use telnet server enable to enable the Telnet server.
Use undo telnet server enable to disable the Telnet server.
The Telnet server is disabled by default.
This command is not supported in FIPS mode.
Examples
# Enable the Telnet server.
<Sysname> system-view
[Sysname] telnet server enable
terminal type
Syntax
terminal type { ansi | vt100 }
undo terminal type
View
User interface view
Default level
2: System level
Parameters
ansi: Specifies the terminal display type as ANSI.
vt100: Specifies the terminal display type as VT100.
Description
Use terminal type to configure the type of terminal display of the current user interface.
Use undo terminal type to restore the default.
By default, the terminal display type is ANSI.
The device supports two types of terminal display: ANSI and VT100. HP recommends you to set the
display type of both the device and the client to VT100. If the device and the client use different display