R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

41
View
System view
Default level
3: Manage level
Parameters
zone-name: Specifies a time zone by its name, a case-sensitive string of 1 to 32 characters.
add: Adds a specified offset to UTC.
minus: Subtracts a specified offset to UTC.
zone-offset: Specifies an offset to the UTC, in the hh:mm:ss format. Zeros can be omitted, unless you
specify 00:00:00.
Description
Use clock timezone to set the local time zone.
Use undo clock timezone to restore the default UTC time zone.
By default, the local time zone is UTC zone.
To verify the setting, use the display clock command.
The timestamps in system messages are adjusted in reference to the time zone and daylight saving
schedule.Related commands: clock datetime, clock summer-time one-off, clock summer-time repeating,
and display clock.
Examples
# Set local time zone to add five hours to UTC time.
<Sysname> system-view
[Sysname] clock timezone z5 add 5
configure-user count
Syntax
configure-user count number
undo configure-user count
View
System view
Default level
2: System level
Parameters
number: Number of users. The value ranges from 1 to 54.
Description
Use configure-user count to set the maximum number of users allowed to enter system view at the same
time.
Use undo configure-user count to restore the default.
By default, up to two users are allowed to enter system view.