R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

1
Login management commands
IMPORTANT:
The FIPS mode is available only for the firewall modules. For more information about FIPS, see
Access
Control Configuration Guide
.
acsei-client enable
Syntax
acsei-client enable
undo acsei-client enable
View
System view
Default level
2: System level
Description
Use acsei-client enable to enable ACSEI client.
Use undo acsei-client enable to disable ACSEI client.
By default, ACSEI client is disabled.
The system supports only one ACSEI client on a time and you can enable ACSEI client only on one
interface. However, the ACSEI client on the OAP board and that on the Comware platform can run
simultaneously.
Examples
# Enable ACSEI client on interface GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] acsei-client enable
activation-key
Syntax
activation-key character
undo activation-key
View
User interface view
Default level
3: Manage level