R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

58
Examples
# Display power supply information.
<Sysname> display power
Power Information:
Power 1 Status: Normal
Power 2 Status: AbNormal
display reboot-type
Syntax
display reboot-type [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display reboot-type to display the mode of the last reboot.
If no keyword is provided, this command displays the reboot mode of the firewall.
Examples
# Display the mode of the last reboot.
<Sysname> display reboot-type
The rebooting type this time is: Cold
The output shows that the last reboot mode of the firewall is Cold boot (cold boot will restart the firewall
by powering it on). (The display of Warm represents a warm boot, which means to restart the firewall by
using the commands like reboot).
display schedule job
Syntax
display schedule job [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level