R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

Default level

2: System level

Parameters

interface [ interface-type interface-number ]: Displays the key parameters of the transceiver module in an

interface. The interface-type interface-number argument specifies an interface by its type and number. If

no interface is specified, this command displays the key parameters of the transceiver modules in all

interfaces.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Getting Started Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display transceiver to display the key parameters of transceiver modules.

Examples

# Display the key parameters of the transceiver module in interface GigabitEthernet 0/3.

<Sysname> display transceiver interface gigabitethernet 0/3

GigabitEthernet0/3 transceiver information:

Transceiver Type : 1000_BASE_SX_SFP

Connector Type : LC

Wavelength(nm) : 850

Transfer Distance(m) : 550(50um),270(62.5um)

Digital Diagnostic Monitoring : YES

Vendor Name : HP

Ordering Name : SFP-GE-SX-MM850

Table 13 Command output

Field Descri

tion

transceiver information Transceiver module information.

Transceiver Type Transceiver module type.

Connector Type

Connector type options:

• SC—Fiber connector developed by NTT.

• LC—1.25 mm/RJ-45 fiber connector developed by Lucent.

• RJ-45.

• CX 4.

Wavelength(nm)

• Fiber transceiver: central wavelength (in nm) of the transmit laser. If

the transceiver supports multiple wavelengths, every two

wavelength values are separated by a comma.

• Copper transceiver: displayed as N/A.