R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101
62
Field Descri
p
tion
Transfer distance(xx)
Transfer distance, with xx representing km for single-mode transceiver
modules and m for other transceiver modules. If the transceiver module
supports multiple transfer media, every two transfer distance values are
separated by a comma. The corresponding transfer medium is
included in the bracket following the transfer distance value. The
following are the supported transfer media:
• 9 um—9/125 um single-mode fiber.
• 50 um—50/125 um multi-mode fiber.
• 62.5 um—62.5/125 um multi-mode fiber.
• TP—Twisted pair.
• CX4—CX4 cable.
Digital Diagnostic Monitoring
Support for the digital diagnosis function:
• YES—supported.
• NO—not supported.
Ordering Name Product code.
display transceiver alarm
Syntax
display transceiver alarm interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays the alarms that are present on the transceiver
module in an interface. The interface-type interface-number argument specifies an interface by its type
and number. If no interface is specified, this command displays present alarm information for the
transceiver modules in all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display transceiver alarm to display alarms present on transceiver modules.
If no error occurs, None is displayed.
Table 14 de
scribes the transceiver module alarms that might occur.