R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

65
Field Remarks
Transceiver type and port configuration
mismatch
Transceiver type does not match port configuration.
Transceiver type not supported by port
hardware
Transceiver type is not supported on the port.
Examples
# Display the alarms present on the transceiver module in interface GigabitEthernet 0/1.
<Sysname> display transceiver alarm interface gigabitethernet 0/1
GigabitEthernet0/1 transceiver current alarm information:
RX loss of signal
RX power low
Table 15 Command output
Field Descri
p
tion
transceiver current alarm information Current alarm information of the transceiver
RX loss of signal Incoming (RX) signal is lost.
RX power low Incoming (RX) power level is low.
display transceiver diagnosis
Syntax
display transceiver diagnosis interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays the present measured values of the digital
diagnosis parameters for the transceiver module in an interface. The interface-type interface-number
argument specifies an interface by its type and number. If no interface is specified, this command
displays the present measured values of the digital diagnosis parameters for the transceiver modules in
all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.