R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

66
Description
Use display transceiver diagnosis to display the present measured values of the digital diagnosis
parameters for transceiver modules.
Examples
# Display the present measured values of the digital diagnosis parameters for the transceiver module in
interface GigabitEthernet 0/2.
<Sysname> display transceiver diagnosis interface gigabitethernet 0/2
GigabitEthernet0/2 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C) Voltage(V) Bias(mA) RX power(dBM) TX power(dBM)
36 3.31 6.13 -35.64 -5.19
Table 16 Command output
Field Descri
p
tion
transceiver diagnostic information Digital diagnosis information of the transceiver in the interface.
Current diagnostic parameters Current diagnostic parameters.
Temp.(°C)
Digital diagnosis parameter-temperature, in °C, with the precision to
1°C.
Voltage(V)
Digital diagnosis parameter-voltage, in V, with the precision to 0.01
V.
Bias(mA)
Digital diagnosis parameter-bias current, in mA, with the precision to
0.01 mA.
RX power(dBM)
Digital diagnosis parameter-RX power, in dBM, with the precision to
0.01 dBM.
TX power(dBM)
Digital diagnosis parameter-TX power, in dBM, with the precision to
0.01 dBM.
display transceiver manuinfo
Syntax
display transceiver manuinfo interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays the electronic label data for the transceiver module
in an interface. The interface-type interface-number argument specifies represents interface type and
interface number. If no interface is specified, this command displays the electronic label data for the
transceiver modules in all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.