R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

71
Default level
3: Manage level
Parameters
None
Description
Use reboot to reboot the firewall.
CAUTION:
• Device reboot can interrupt network services.
• If the main system software image file has been corrupted or does not exist, the device cannot reboot.
You must re-specify a main system software image file, or power off the device and then power it on so
the system can reboot with the backup system software image file.
• If you are performing file operations at the reboot time, the system does not reboot to avoid data loss.
Examples
# Reboot the firewall.
<Sysname> reboot
reset unused porttag
Syntax
reset unused porttag
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use reset unused porttag to clear unused 16-bit indexes.
A confirmation is required when you execute this command. The command does not run if you enter N
to cancel the operation or fail to make a confirmation within 30 seconds.
Examples
# Clear unused 16-bit indexes.
<Sysname> reset unused porttag
Current operation will delete all unused port tag(s). Continue? [Y/N]:y
<Sysname>
schedule job
Syntax
schedule job { at time1 [ date ] | delay time2 } view view-name command