R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

74
The device supports only one device reboot schedule. If you configure the schedule reboot at command
multiple times, the last configuration takes effect. The schedule reboot at command and the schedule
reboot delay command overwrite each other, and whichever is configured last takes effect.
The alert "REBOOT IN ONE MINUTE" appears one minute before the reboot time.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
CAUTION:
• Device reboot can interrupt network services.
• Changing any clock setting can cancel the reboot schedule.
Examples
# Configure the firewall to reboot at 12:00 AM (supposing that the current time is 11:43 on June 6,
2006).
<Sysname> schedule reboot at 12:00
Reboot system at 12:00 06/06/2006(in 0 hour(s) and 16 minute(s))
confirm? [Y/N]:
Enter y at the prompt. If you have used the terminal logging command to enable the log display function
(enabled by default) on the terminal, the system automatically displays a reboot schedule log message.
<Sysname>
%Jun 6 11:43:11:629 2006 Sysname CMD/4/REBOOT:
vty0(192.168.1.54): Set schedule reboot parameters at 11:43:11 06/06/2006, and system will
reboot at 12:00 06/06/2006.
schedule reboot delay
Syntax
schedule reboot delay { hh:mm | mm }
undo schedule reboot
View
User view
Default level
3: Manage level
Parameters
hh:mm: Specifies a delay for the device reboot, in the hh:mm format. The hh value ranges from 0 to 720,
and the mm value ranges from 0 to 59. When the hh value is 720, the mm value cannot be more than
0.
mm: Specifies a delay for the device reboot in minutes, which ranges from 0 to 43200.
Description
Use schedule reboot delay to schedule a device reboot to occur after a delay.
Use undo schedule reboot to disable the scheduled reboot function.
By default, the scheduled reboot function is disabled.
The reboot delay cannot exceed 30 x 24 x 60 minutes, or 30 days.