R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

86
CLI configuration commands
IMPORTANT:
The FIPS mode is available only for the firewall modules. For more information about FIPS, see
Access
Control Configuration Guide
.
command-alias enable
Syntax
command-alias enable
undo command-alias enable
View
System view
Default level
2: System level
Parameters
None
Description
Use command-alias enable to enable the command alias function.
Use undo command-alias enable to disable the command alias function.
By default, the command alias function is disabled.
Examples
# Enable the command alias function.
<Sysname> system-view
[Sysname] command-alias enable
# Disable the command alias function.
<Sysname> system-view
[Sysname] undo command-alias enable
command-alias mapping
Syntax
command-alias mapping cmdkey alias
undo command-alias mapping cmdkey
View
System view