R3721-F3210-F3171-HP High-End Firewalls Getting Started Guide-6PW101

17
Table 3 Configuration required for different console login authentication modes
Authentication mode Confi
g
uration tasks Reference
None
Set the authentication mode to none for the console
user interface.
"Configuring none
authentication f
or console
login."
Password
Enable password authentication on the console user
interface.
Set a password.
"Configuring password
authentication f
or console
login."
Scheme
Enable scheme authentication on the console user
interface.
Configure local or remote authentication settings.
To configure local authentication:
1. Configure a local user and specify the
password.
2. Configure the device to use local authentication.
To configure remote authentication:
1. Configure the RADIUS or HWTACACS scheme
on the device.
2. Configure the username and password on the
AAA server.
3. Configure the device to use the scheme for user
authentication.
"Configuring scheme
authentication f
or console
login."
Configuring none authentication for console login
Ste
p
Command Remarks
1. Enter system view
system-view N/A
2. Enter console user interface
view
user-interface console first-number
[ last-number ]
N/A
3. Specify the none
authentication mode
authentication-mode none
By default, you can log in to the
device through the console port
without authentication, and have
user privilege level 3 after login.
4. Configure common settings
for console login
See "Configuring common console
user interface settings (optional)."
Optional.
The next time you attempt to log in through the console port, you do not need to provide any username
or password.
Configuring password authentication for console login
Ste
p
Command Remarks
1. Enter system view
system-view N/A