R3721-F3210-F3171-HP High-End Firewalls Getting Started Guide-6PW101

18
Ste
p
Command Remarks
2. Enter console user interface
view
user-interface console first-number
[ last-number ]
N/A
3. Configure the authentication
mode as local password
authentication
authentication-mode password
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3 after login.
4. Set the local password
set authentication password
{ cipher | simple } password
By default, no local password is
set.
5. Configure common settings
for console login
See "Configuring common console
user interface settings (optional)."
Optional.
The next time you attempt to log in through the console port, you must provide the configured login
password.
Configuring scheme authentication for console login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter console user
interface view.
user-interface console first-number
[ last-number ]
N/A
3. Specify the scheme
authentication mode.
authentication-mode scheme
Whether local, RADIUS, or HWTACACS
authentication is adopted depends on the
configured AAA scheme.
By default, users that log in through the
console port are not authenticated.
4. Enable command
authorization.
command authorization
Optional.
By default, command authorization is not
enabled.
By default, the command level depends on
the user privilege level. A user is
authorized a command level not higher
than the user privilege level. With
command authorization enabled, the
command level for a login user is
determined by both the user privilege level
and AAA authorization. If a user executes
a command of the corresponding
command level, the authorization server
checks whether the command is
authorized. If yes, the command can be
executed.