R3721-F3210-F3171-HP High-End Firewalls Getting Started Guide-6PW101

33
Task Command Remarks
Log in to an IPv6 SSH server. ssh2 ipv6 server
server is the IPv6 address or host
name of the server.
To work with the SSH server, you might need to configure the SSH client. For information about
configuring the SSH client, see System Management and Maintenance Configuration Guide.
Displaying and maintaining CLI login
Task Command Remarks
Display information about the user
interfaces that are being used.
display users [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display information about all user
interfaces that the device supports.
display users all [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display user interface information.
display user-interface [ num1 |
{ console | vty } num2 ]
[ summary ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the configuration of the
device when it serves as a Telnet
client.
display telnet client configuration
[ | { begin | exclude | include }
regular-expression ]
Available in any view.
Release a specific user interface.
free user-interface { num1 |
{ console | vty } num2 }
Available in user view.
Multiple users can log in to the
system to simultaneously configure
the device. You can execute the
command to release the
connections established on the
specified user interfaces.
You cannot use this command to
release the connection that you are
using.
Lock the current user interface. lock
Available in user view.
By default, the current user
interface is not locked.
Send messages to the specified
user interfaces.
send { all | num1 | { console | vty }
num2 }
Available in user view.