R3721-F3210-F3171-HP High-End Firewalls Getting Started Guide-6PW101

88
Figure 54 Adding a local user
3. Configure a local user as described in Table 16.
4. Click Apply.
Table 16 Configuration items
Item Descri
p
tion
User Name
Enter a username which is case sensitive, with "/", "\", ":", "|", "*", "?", "<",
">", "@" and """excluded.
IMPORTANT:
When you create a local user, there can be spaces in the username, but there
cannot be spaces before and after the username. Leading and trailing spaces will
be ignored. If you enter only spaces for a username, your input is taken as an empty
input.
User Privilege Level
Set the user privilege level for a user.
User privilege levels, ranging from low to high, are visitor, monitor, configure,
and management.
IMPORTANT:
• Only web, FTP, Telnet, and SSH users support user privilege level
configuration.
• Users that use the root virtual device and users that use other virtual devices
have different privilege levels. For more information, see " Web overview."
Service Type
Set the service type that a user can use, including web, FTP, SSH, Telnet,
Terminal, and PPP.
Password
Set and confirm the password. The confirm password must be the same as the
previously set password.
Confirm Password