R3721-F3210-F3171-HP High-End Firewalls Getting Started Guide-6PW101

89
Item Descri
p
tion
Virtual Device
Set the virtual device to which a user belongs.
Every time a user logs in through the Web interface, the user logs in to the virtual
device to which the user belongs. When a root virtual device user with privilege
level Configure or Management logs in to the device, the user can log in to
another virtual device by selecting Device > Virtual Device > Virtual Device. The
access right of the user is the same as other virtual device users that have the
same privilege level.
Local user configuration example (in the Web interface)
Network requirements
In the networking environment shown in Figure 55, configure Firewall so that user Emily can log in to
Firewall (root virtual device) through the Web interface and view the data, but cannot perform any
configurations.
Figure 55 Network diagram
Configuration procedure
1. Configure the IP address of the interface and the zone to which it belongs. (Details not shown.)
2. Configure local user Emily, with the privilege level Monitor, service type Web, and virtual device
Root:
a. Select User > Local User in the navigation tree.
b. Click Add.
Figure 56 Creating a local user
c. Enter the username Emily.
d. Select the user privilege level Monitor.