R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

99
Default level
1: Monitor level
Parameters
bridge-aggregation: Displays the load sharing criterion or criteria of the aggregation group
corresponding to the specified Layer 2 aggregate interface.
route-aggregation: Displays the load sharing criterion or criteria of the aggregation group
corresponding to the specified Layer 3 aggregate interface.
interface-number: Specifies an existing aggregate interface number. The value range for the
interface-number argument is the set of all existing aggregate interface numbers.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display link-aggregation load-sharing mode to display global or group-specific link-aggregation
load sharing criterion or criteria.
To display the global link-aggregation load sharing criterion or criteria, run the command without the
interface keyword.
To display all the group-specific load sharing criteria, run the command with the interface keyword, but
do not specify a particular interface.
To display the load sharing criterion or criteria of a particular aggregation group, perform the command
with the aggregate interface specified.
The bridge-aggregation or route-aggregation keyword becomes available only after you create Layer 2
or Layer 3 aggregate interfaces on the device.
Examples
# Display the global link-aggregation load sharing criteria.
<Sysname> display link-aggregation load-sharing mode
Link-Aggregation Load-Sharing Mode:
Layer 2 traffic: destination-ip address, source-ip address,
destination-port, source-port,
ip-protocol
Layer 3 traffic: destination-ip address, source-ip address,
destination-port, source-port,
ip-protocol
# Display the link-aggregation load sharing criteria of the aggregation group corresponding to Layer 2
aggregate interface Bridge-Aggregation 1.
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 1
Bridge-Aggregation1 Load-Sharing Mode: