R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

105
GE0/3 U 63 1
Table 28 Command output
Field Descri
p
tion
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Port Status Port state: Selected or unselected.
Flags
LACP state flags:
• A—LACP is enabled.
• B—Indicates the LACP short timeout.
• C—The sending system detects that the link is aggregatable.
• D—The sending system detects that the link is synchronized.
• E—The sending system detects that the incoming frames are collected.
• F—The sending system detects that the outgoing frames are distributed.
• G—The sending system receives frames in default state.
• H—The sending system receives frames in expired state.
Aggregation Interface Name of the aggregate interface.
Aggregation Mode
Mode of the aggregation group:
• Static—Static aggregation.
• Dynamic—Dynamic aggregation, which is not supported.
System ID
Local system ID, comprising the system LACP priority and the system MAC
address.
Local Information about the local end.
Port Port type and number.
Status Port state: selected or unselected.
Priority Port aggregation priority.
Oper-Key Operational key.
Flag LACP protocol state flag.
Remote Information about the remote end.
Actor Local port type and number.
Partner Remote port index.
enable snmp trap updown
Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view