R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

107
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]
interface route-aggregation
Syntax
interface route-aggregation { interface-number | interface-number.subnumber }
undo interface route-aggregation { interface-number | interface-number.subnumber }
View
System view
Default level
2: System level
Parameters
interface-number: Specifies a Layer 3 aggregate interface by its number, in the range of 1 to 1024
interface-number.subnumber: Specifies a subinterface of a Layer 3 aggregate interface. The
interface-number argument specifies the main interface number. The subnumber argument specifies the
subinterface number in the range of 1 to 4094 and is separated from the main interface number by a dot
(.).
Description
Use interface route-aggregation to create a Layer 3 aggregate interface or subinterface and enter the
Layer 3 aggregate interface or subinterface view.
Use undo interface route-aggregation to remove a Layer 3 aggregate interface or subinterface.
When you create a Layer 3 aggregate interface, a Layer 3 aggregation group with the same number is
automatically created. Removing the Layer 3 aggregate interface also removes the Layer 3 aggregation
group. At the same time, the member ports of the aggregation group, if any, leave the aggregation
group.
Removing a Layer 3 aggregate subinterface does not affect the state of the main interface and the
corresponding aggregation group.
Examples
# Create Layer 3 aggregate interface Route-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface route-aggregation 1
[Sysname-Route-Aggregation1]
lacp period short
Syntax
lacp period short
undo lacp period
View
Ethernet interface view