R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

108
Default level
2: System level
Parameters
None
Description
Use lacp period short to set the LACP timeout interval on a port to the short timeout interval (1 second).
Use undo lacp period to restore the default setting.
The default LACP timeout interval is the long timeout interval (30 seconds).
Examples
# Set the LACP timeout interval on GigabitEthernet 0/1 to the short timeout interval (1 second).
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] lacp period short
lacp system-priority
Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Default level
2: System level
Parameters
system-priority: Specifies the LACP priority of the local system, ranging from 0 to 65535. The smaller the
value, the higher the system LACP priority.
Description
Use lacp system-priority to set the LACP priority of the local system.
Use undo lacp system-priority to restore the default setting.
By default, the system LACP priority is 32768.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64
link-aggregation load-sharing mode
Syntax
link-aggregation load-sharing mode { destination-ip | destination-port | ip-protocol | source-ip |
source-port } *