R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

109
undo link-aggregation load-sharing mode
View
System view, Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default level
2: System level
Parameters
destination-ip: Performs load sharing in link aggregation groups based on destination IP address.
destination-port: Performs load sharing in link aggregation groups based on destination port.
ip-protocol: Performs load sharing in link aggregation groups based on IP protocol type.
source-ip: Performs load sharing in link aggregation groups based on source IP address.
source-port: Performs load sharing in link aggregation groups based on source port.
Description
Use link-aggregation load-sharing mode to configure the global or group-specific link-aggregation load
sharing criteria.
Use undo link-aggregation load-sharing mode to restore the default setting.
By default, all link-aggregation load sharing criteria are enabled.
The load sharing criteria that you configure will overwrite the previous criteria.
Examples
# Configure the destination IP address as the load sharing criterion specific to the link aggregation group
of aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation load-sharing mode destination-ip
link-aggregation selected-port maximum
Syntax
link-aggregation selected-port maximum number
undo link-aggregation selected-port maximum
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default level
2: System level
Parameters
number: Specifies the maximum number of Selected ports allowed in an aggregation group, in the range
of 1 to 8.
Description
Use link-aggregation selected-port maximum to configure the maximum number of Selected ports
allowed in the aggregation group.