R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

111
Examples
# Configure the minimum number of Selected ports as 3 in the aggregation group corresponding to
Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port minimum 3
link-aggregation mode
Syntax
link-aggregation mode dynamic
undo link-aggregation mode
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default level
2: System level
Parameters
None
Description
Use link-aggregation mode dynamic to configure an aggregation group to work in dynamic
aggregation mode.
Use undo link-aggregation mode to restore the default setting.
By default, an aggregation group works in static aggregation mode.
To change the aggregation mode of an aggregation group that contains member ports, remove all the
member ports from the aggregation group first.
NOTE:
During periods of device overloading or interface congestion, LACP packets, with no priority, might be
lost or delayed for processing, which could result in port negotiation errors.
Examples
# Configure the aggregation group corresponding to Bridge-Aggregation 1 to operate in dynamic
aggregation mode.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation mode dynamic
link-aggregation port-priority
Syntax
link-aggregation port-priority port-priority
undo link-aggregation port-priority