R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

112
View
Ethernet interface view
Default level
2: System level
Parameters
port-priority: Specifies a port aggregation priority, ranging from 0 to 65535. The smaller the value, the
higher the port aggregation priority.
Description
Use link-aggregation port-priority to set the aggregation priority of a port.
Use undo link-aggregation port-priority to restore the default setting.
The default aggregation priority of a port is 32768.
When the number of candidate selected ports is greater than the maximum number of selected ports
allowed in a static aggregation group, changing the aggregation priority of a port may affect the
aggregation state of the ports in the static aggregation group.
Examples
# Set the aggregation priority of port GigabitEthernet 0/1 to 64.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] link-aggregation port-priority 64
mtu
Syntax
mtu size
undo mtu
View
Layer 3 aggregate interface view, Layer 3 aggregate subinterface view
Default level
2: System level
Parameters
size: Specifies the maximum transmission unit (MTU), ranging from 46 to 1500 bytes.
Description
Use mtu to set the MTU of a Layer 3 aggregate interface or subinterface.
Use undo mtu to restore the default setting.
By default, the MTU for Layer 3 aggregate interfaces and subinterfaces is 1500 bytes.
Related commands: display interface.
Examples
# Set the MTU of Layer 3 aggregate interface Route-Aggregation 1 to 1430 bytes.
<Sysname> system-view
[Sysname] interface route-aggregation 1