R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

7
<Sysname> reset vrrp statistics
vrrp dot1q
Syntax
vrrp dot1q vid vlan-id [ secondary-dot1q secondary-vlan-id ]
undo vrrp dot1q
View
Interface view
Default level
2: System level
Parameters
vid vlan-id: Outer VLAN ID, which ranges from 1 to 4094.
secondary-dot1q secondary-vlan-id: Inner VLAN ID. The secondary-vlan-id argument ranges from 1 to
4094.
Description
Use vrrp dot1q to specify a VRRP control VLAN for the subinterface configured with VLAN termination.
Use undo vrrp dot1q to restore the default.
By default, no VRRP control VLAN is specified for the subinterface configured with VLAN termination. The
master sends VRRP advertisements within all VLANs whose VLAN packets are configured to be
terminated by the subinterface.
If you re-execute the command, the latest configuration overwrites the previous one.
This command is supported on only Layer 3 Ethernet subinterfaces and Layer 3 aggregation
subinterfaces.
Examples
# Specify the outer VLAN ID and inner VLAN ID for the VRRP control VLAN as 2 and 100 respectively.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1.2
[Sysname-GigabitEthernet0/1.2] vrrp dot1q vid 2 secondary-dot1q 100
vrrp method
Syntax
vrrp method { real-mac | virtual-mac }
undo vrrp method
View
System view
Default level
2: System level