R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

116
BFD configuration commands
The following matrix shows the feature and firewall compatibility:
Feature F1000-A-EI/S-EI F1000-E F5000 Firewall module
BFD No No Yes No
bfd detect-multiplier
Syntax
bfd detect-multiplier value
undo bfd detect-multiplier
View
Interface view
Default level
2: System level
Parameters
value: Detect time multiplier, in the range of 3 to 50.
Description
Use bfd detect-multiplier to configure the detection time multiplier.
Use undo bfd detect-multiplier to restore the default.
The default is 5.
Examples
# Configure the detection time multiplier as 6 on GigabitEthernet 4/2.
<Sysname> system-view
[Sysname] interface gigabitethernet 4/2
[Sysname-GigabitEthernet4/2] bfd detect-multiplier 6
bfd echo-source-ip
Syntax
bfd echo-source-ip ip-address
undo bfd echo-source-ip
View
System view
Default level
2: System level