R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

118
View
Interface view
Default level
2: System level
Parameters
value: Minimum interval for receiving BFD control packets, in milliseconds. The value must be a multiple
of 10. The value ranges from 10 to 1000, and the default is 400.
Description
Use bfd min-receive-interval to configure the minimum interval for receiving BFD control packets.
Use undo bfd min-receive-interval to restore the default minimum interval for receiving BFD control
packets.
If the remote device sends BFD control packets at an interval shorter than the minimum receiving interval
of the local device, the remote device changes its sending interval to the minimum receiving interval of
the local device.
Examples
# Configure the minimum interval for receiving BFD control packets on GigabitEthernet 4/2 as 500
milliseconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 4/2
[Sysname-GigabitEthernet4/2] bfd min-receive-interval 500
bfd min-transmit-interval
Syntax
bfd min-transmit-interval value
undo bfd min-transmit-interval
View
Interface view
Default level
2: System level
Parameters
value: Minimum interval for transmitting BFD control packets, in milliseconds. The value must be a
multiple of 10. The value ranges from 10 to 1000 and the default is 400.
Description
Use bfd min-transmit-interval to configure the minimum interval for transmitting BFD control packets.
Use undo bfd min-transmit-interval to restore the default minimum interval for transmitting BFD control
packets.
A proper interval ensures that BFD control packets are not transmitted faster than the device can deal with.
The actual interval for transmitting BFD control packets at the local device should be the greater between
the minimum interval for sending BFD control packets configured on the local interface and the minimum
interval for receiving BFD control packets on the remote device.