R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

119
Examples
# Configure the minimum interval for transmitting BFD control packets on GigabitEthernet 4/2 as 500
milliseconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 4/2
[Sysname-GigabitEthernet4/2] bfd min-transmit-interval 500
bfd multi-hop destination-port
Syntax
bfd multi-hop destination-port port-number
undo bfd multi-hop destination-port
View
System view
Default level
2: System level
Parameters
port-number: Destination port number of multi-hop BFD control packets, 3784 or 4784.
Description
Use bfd multi-hop destination-port to configure the destination port number for multi-hop BFD control
packets as 3784 or 4784.
Use undo bfd multi-hop destination-port to restore the default.
By default, the destination port number for multi-hop BFD control packets is 4784.
Examples
# Configure the destination port number for multi-hop BFD control packets as 3784.
<Sysname> system-view
[Sysname] bfd multi-hop destination-port 3784
bfd session init-mode
Syntax
bfd session init-mode { active | passive }
undo bfd session init-mode
View
System view
Default level
2: System level
Parameters
active: Uses the active mode. In the active mode, BFD actively transmits BFD control packets to the remote
device.