R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

undo vrrp vrid virtual-router-id priority

View

Interface view

Default level

2: System level

Parameters

virtual-router-id: VRRP group number, which ranges from 1 to 255.

priority-value: Priority value of the router in the specified VRRP group, which ranges from 1 to 254. A

higher number indicates a higher priority.

Description

Use vrrp vrid priority to configure the priority of the router in the specified VRRP group.

Use undo vrrp vrid priority to restore the default.

By default, the priority of a router in a VRRP group is 100.

• Before executing the command, create a VRRP group on an interface and configure the virtual IP

address of the VRRP group.

• The role that a router plays in a VRRP group depends on its priority. A higher priority means that the

router is more likely to become the master. Priority 0 is reserved for special use and 255 for the IP

address owner.

• If the router is the IP address owner, its priority is always 255. Therefore, it remains as the master so

long as it is functioning properly.

Related commands: display vrrp.

Examples

# Set the priority of the router in VRRP group 1 to 150.

<Sysname> system-view

[Sysname] interface GigabitEthernet 0/1

[Sysname-GigabitEthernet0/1] vrrp vrid 1 virtual-ip 10.1.1.1

[Sysname-GigabitEthernet0/1] vrrp vrid 1 priority 150

vrrp vrid timer advertise

Syntax