R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

35
------------------------------------------------------------
1 1 1 0 82
Statistics for packets acknowledged:
Peak 10Sec 1Min 5Min Total-Data
------------------------------------------------------------
1 1 1 0 78
Table 12 Command output
Field Descri
p
tion
Peak
Peak rate in pps (average rate is computed every 10 seconds, and the greatest average
rate is taken as the peak rate).
10Sec Average rate (in pps) in the last 10 seconds.
1Min Average rate (in pps) in the last 1 minute.
5Min Average rate (in pps) in the last 5 minutes.
Total-Data
Total amount of data collected from the time when IPC performance statistics was enabled
to the time when this command is executed.
display ipc queue
Syntax
display ipc queue { node node-id | self-node } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
node node-id: Displays the sending queue information of the specified node, where node-id represents
the number of the specified node. The value of the node-id argument is either 0 or 1.
self-node: Displays the sending queue information of the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipc queue to display the sending queue information of the specified node.
Examples
# Display the sending queue information of the local node.
<Sysname> display ipc queue self-node
QueueType QueueID Dst-NodeID Length FullTimes Packet