R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

46
Description
Use description to give a brief description of a test group, usually, the test type or test purpose of a test
group.
Use undo description to remove the configured description information.
By default, no descriptive string is available for a test group.
Examples
# Configure the descriptive string for a test group as icmp-probe.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
destination ip
Syntax
destination ip ip-address
undo destination ip
View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
ip-address: Destination IP address of a test operation.
Description
Use destination ip to configure a destination IP address for a test operation.
Use undo destination ip to remove the configured destination IP address.
By default, no destination IP address is configured for a test operation.
Examples
# Configure the destination IP address of an ICMP echo test operation as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1
destination port
Syntax
destination port port-number
undo destination port
View
TCP, UDP echo, UDP jitter test type view