Manualshelf

R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
51525354555657585960
47
Default level
2: System level
Parameters
port-number: Destination port number of a test operation, which ranges from 1 to 65535.
Description
Use destination port to configure a destination port number for a test operation.
Use undo destination port to remove the configured destination port number.
By default, no destination port number is configured for a test operation.
Do not perform a UDP jitter test on ports from 1 to 1023 (known ports). Otherwise, the NQA test fails or
the corresponding services of this port are unavailable.
Examples
# Configure the destination port number of a test operation as 9000.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000
display nqa history
Syntax
display nqa history [ admin-name operation-tag ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
admin-name operation-tag: Displays history records of an NQA test group. If these two arguments are
not specified, history records of all test groups are displayed. admin-name represents the name of the
NQA test group administrator who creates the NQA operation. It is a case-insensitive string of 1 to 32
characters. operation-tag represents the test operation tag. It is a case-insensitive string of 1 to 32
characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display nqa history to display history records of the specified or all NQA test groups.