R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

1
VRRP configuration commands
NOTE:
• The term
router in this document refers to both routers and Layer 3 firewalls.
• The interfaces that VRRP involves can only be Layer 3 Ethernet interfaces and Layer 3 aggregate
interfaces unless otherwise specified.
• VRRP cannot be configured on interfaces in aggregation group.
IPv4-based VRRP configuration commands
display vrrp
Syntax
display vrrp [ verbose ] [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
verbose: Displays detailed state information of VRRP groups.
interface interface-type interface-number: Displays VRRP group state information of the specified
interface. interface-type interface-number specifies an interface by its type and number.
vrid virtual-router-id: Displays state information of the specified VRRP group. virtual-router-id specifies a
VRRP group by its group number, which ranges from 1 to 255.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display vrrp to display the state information of VRRP groups.
If you do not specify verbose, only the brief state information of VRRP group is displayed.
If you specify both an interface and a VRRP group, only the state information of the specified VRRP group
on the interface is displayed. If you only specify an interface, the state information of all the VRRP groups