R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

61
Description
Use history-record keep-time to set the lifetime of the history records in an NQA test group.
Use undo history-record keep-time to restore the default.
By default, the history records in an NQA test group are kept for 120 minutes.
When an NQA test completes, the timing starts. All the records are removed when the lifetime is
reached.
Examples
# Configure the lifetime of the history records in an NQA test group as 100 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record keep-time 100
history-record number
Syntax
history-record number number
undo history-record number
View
Any NQA test type view
Default level
2: System level
Parameters
number: Maximum number of history records that can be saved in a test group, which ranges from 0 to
50.
Description
Use history-record number to configure the maximum number of history records that can be saved in a
test group.
Use undo history-record number to restore the default.
By default, the maximum number of records that can be saved in a test group is 50.
If the number of history records in a test group exceeds the maximum number, the earliest history record
is removed.
Examples
# Configure the maximum number of history records that can be saved in a test group as 10.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record number 10