R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

63
By default, the data transmission mode is active.
Examples
# Set the data transmission mode to passive for FTP tests.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] mode passive
next-hop
Syntax
next-hop ip-address
undo next-hop
View
ICMP echo test type view
Default level
2: System level
Parameters
ip-address: IP address of the next hop.
Description
Use next-hop to configure the next hop IP address for ICMP echo requests of a test group.
Use undo next-hop to remove the configured next hop IP address.
By default, no next hop IP address is configured.
Examples
# Configure the next hop IP address as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
nqa
Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
View
System view
Default level
2: System level