R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

2
on the interface is displayed. If you specify neither, the state information of all the VRRP groups on the
router is displayed.
Examples
# Display brief information about all VRRP groups on the device.
<Sysname> display vrrp
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface VRID State Run Adver Auth Virtual
Pri Timer Type IP
---------------------------------------------------------------------
GE0/1 1 Master 140 1 Simple 1.1.1.1
Table 1 Command output
Field Descri
p
tion
Run Mode Current VRRP working mode. The mode is standard mode.
Run Method
Current VRRP running mode:
• Real MAC—Real MAC mode, which means the virtual IP address of the
VRRP group is mapped to the real MAC address of the interface.
• Virtual MAC—Virtual MAC mode, which means the virtual IP address of
the VRRP group is mapped to the virtual MAC address.
Total number of virtual routers Number of VRRP groups.
Interface Interface to which the VRRP group belongs.
VRID ID of the VRRP group.
Run Pri
Running priority of the router(the current priority of the router). With VRRP
tracking configured, when the state of the monitored interface or track
entry changes, the priority of the router changes.
Adver. Timer VRRP advertisement interval, in seconds.
Auth Type
Authentication type:
• None—No authentication.
• Simple—Simple text authentication.
• MD5—MD5 authentication.
Virtual IP Virtual IP address of the VRRP group.
# Display detailed information about all VRRP groups on the router.
<Sysname> display vrrp verbose
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 1
Admin Status : Up State : Master
Config Pri : 150 Running Pri : 140
Preempt Mode : Yes Delay Time : 5