R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

68
Description
Use operation interface to specify the interface to perform a DHCP test. The specified interface must be
up; otherwise, no probe packets can be sent out.
Use undo operation interface to restore the default.
By default, no interface is specified to perform a DHCP test.
Examples
# Specify the interface to perform a DHCP test as GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] operation interface GigabitEthernet 0/1
password (FTP test type view)
Syntax
password password
undo password
View
FTP test type view
Default level
2: System level
Parameters
password: Password used to log in to the FTP server, a case-sensitive string of 1 to 32 characters.
Description
Use password to configure a password used to log onto the FTP server.
Use undo password to remove the configured password.
By default, no password is configured for logging onto the FTP server.
Related commands: username and operation.
Examples
# Configure the password used for logging in to the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password ftpuser
probe count
Syntax
probe count times
undo probe count