R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

71
probe packet-timeout
Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
View
UDP jitter test type view
Default level
2: System level
Parameters
packet-timeout: Timeout time for waiting for responses in a UDP jitter test, which ranges from 10 to
3600000 milliseconds.
Description
Use probe packet-timeout to configure the timeout time for waiting for a response in a UDP jitter test.
Use undo probe packet-timeout to restore the default.
By default, the timeout time in a UDP jitter is 3000 milliseconds.
Examples
# Configure the timeout time for waiting for a response in a UDP jitter test as 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-timeout 100
probe timeout
Syntax
probe timeout timeout
undo probe timeout
View
DHCP, DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo test type view
Default level
2: System level
Parameters
timeout: Timeout time for a probe operation, in milliseconds. The value ranges from 10 to 86400000 for
an FTP or HTTP probe operation, and from 10 to 3600000 for a DHCP, DLSw, ICMP echo, SNMP, TCP
or UDP echo probe operation.
Description
Use probe timeout to configure the timeout time for a probe operation. When a probe operation does
not complete within the period, the probe operation is timed out.
Use undo probe timeout to restore the default.