R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

81
route-option bypass-route
Syntax
route-option bypass-route
undo route-option bypass-route
View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
None
Description
Use route-option bypass-route to enable the routing table bypass function to test the direct connectivity
to the direct destination.
Use undo route-option bypass-route to disable the routing table bypass function.
By default, the routing table bypass function is disabled.
When the routing table bypass function enabled, the routing table is not searched, and the packet is
directly sent to the destination in a directly connected network.
Examples
# Enable the routing table bypass function.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] route-option bypass-route
source interface
Syntax
source interface interface-type interface-number
undo source interface
View
ICMP echo test type view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use source interface to configure the source interface for ICMP echo request packets. The ICMP echo
request packets take the IP address of the source interface as their source IP address. The specified source
interface must be up; otherwise, no ICMP echo requests can be sent out.