R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

83
source port
Syntax
source port port-number
undo source port
View
SNMP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
port-number: Source port number of probe packets, which ranges from 1 to 50000.
Description
Use source port to configure the source port of probe packets.
Use undo source port to remove the configured port number.
By default, no source port number is configured.
Examples
# Configure port 8000 as the source port of probe packets in the UDP echo test group.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] source port 8000
statistics hold-time
Syntax
statistics hold-time hold-time
undo statistics hold-time
View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter test type view
Default level
2: System level
Parameters
hold-time: Hold time of a statistics group in minutes, which ranges from 1 to 1440.
Description
Use statistics hold-time to configure the hold time of statistics groups for a test group. A statistics group
is deleted when its hold time expires.
Use undo statistics hold-time to restore the default.
By default, the hold time of a statistics group is 120 minutes.
This command is not supported by DHCP tests.