R3721-F3210-F3171-HP High-End Firewalls High Availability Command Reference-6PW101

89
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1
NQA server configuration commands
NOTE:
You only need to configure the NQA server for UDP jitter, TCP, and UDP echo tests.
display nqa server status
Syntax
display nqa server status [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display nqa server status to display NQA server status.
Examples
# Display NQA server status.
<Sysname> display nqa server status
nqa server is: enabled
tcp-connect:
IP Address Port Status
2.2.2.2 2000 active
udp-echo:
IP Address Port Status
3.3.3.3 3000 inactive
Table 22 Command output
Field Description
tcp-connect NQA server status in the NQA TCP test.
udp-echo NQA server status in the NQA UDP test.