R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

102
Task Remarks
Configuring SNMP tests
Configuring TCP tests
Configuring UDP echo tests
Configuring DLSw tests
Configuring the collaboration function Optional.
Configuring threshold monitoring Optional.
Configuring the NQA statistics collection function Optional.
Configuring the history records saving function Optional.
Configuring optional parameters for an NQA test group Optional.
Configuring a schedule for an NQA test group Required.
Configuring the NQA server
To perform TCP, UDP echo, or UDP jitter tests, configure the NQA server on the peer device. The NQA
server responses to the probe packets sent from the NQA client by listening to the specified destination
address and port number.
To configure the NQA server:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable the NQA server.
nqa server enable Disabled by default.
3. Configure the listening
service.
nqa server { tcp-connect |
udp-echo } ip-address
port-number
The destination IP address and port
number must be the same as those
configured on the NQA client. A
listening service must be unique on
the NQA server.
Enabling the NQA client
Configurations on the NQA client take effect only when the NQA client is enabled.
To enable the NQA client:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable the NQA client.
nqa agent enable
Optional.
Enabled by default.