R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

103
Creating an NQA test group
Create an NQA test group before you configure NQA tests.
To create an NQA test group:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA test group
and enter the NQA test group
view.
nqa entry
admin-name
operation-tag
In the NQA test group view, you can specify the
test type
You can use the nqa entry command to enter the
test type view of an NQA test group with test
type configured.
Configuring an NQA test group
Configuring ICMP echo tests
ICMP echo tests of an NQA test group uses ICMP echo response information to test reachability of a
destination host. An ICMP echo test has the same function as the ping command but provides more
output information. In addition, you can specify the next hop for ICMP echo tests. ICMP echo tests are
used to locate connectivity problems in a network.
To configure ICMP echo tests:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter NQA test group view.
nqa entry admin-name
operation-tag
N/A
3. Configure the test type as
ICMP echo and enter test type
view.
type icmp-echo N/A
4. Configure the destination
address of ICMP echo
requests.
destination ip ip-address
By default, no destination IP
address is configured.
5. Configure the size of the data
field in each ICMP echo
request.
data-size size
Optional.
100 bytes by default.
6. Configure the string to be
filled in the data field of each
ICMP echo request.
data-fill string
Optional.
By default, the string is the
hexadecimal number
00010203040506070809.
7. Apply ICMP echo tests to the
specified VPN.
vpn-instance vpn-instance-name
Optional.
By default, ICMP echo tests apply
to the public network.