R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

105
Ste
p
Command Remarks
3. Configure the test type as
DHCP and enter test type
view.
type dhcp N/A
4. Specify an interface to
perform DHCP tests.
operation interface interface-type
interface-number
By default, no interface is
configured to perform DHCP tests.
The specified interface must be up;
otherwise, no probe packets can
be sent out.
5. Configure optional
parameters.
See "Configuring optional
parameters for an NQA test
group"
Optional.
NOTE:
• The interface that performs DHCP tests does not change its IP address. A DHCP test only simulates
address allocation in DHCP.
• When a DHCP test completes, the NQA client sends a DHCP-RELEASE packet to release the obtained IP
address.
Configuring FTP tests
FTP tests of an NQA test group are used to test the connection between the NQA client and an FTP server
and the time required for the FTP client to transfer a file to or download a file from the FTP server.
Before you start FTP tests, configure the FTP server. For example, configure a username and password that
are used to log in to the FTP server. For more information about FTP server configuration, see System
Management and Maintenance Configuration Guide.
To configure FTP tests:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter NQA test group view.
nqa entry admin-name
operation-tag
N/A
3. Configure the test type as FTP
and enter test type view.
type ftp N/A
4. Specify the IP address of the
FTP server as the destination
address of FTP request
packets.
destination ip ip-address
By default, no destination IP
address is configured.
5. Configure the source IP
address of FTP request
packets.
source ip ip-address
By default, no source IP address is
specified.
The source IP address must be the
IP address of a local interface. The
local interface must be up;
otherwise, no FTP requests can be
sent out.