R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

113
Ste
p
Command Remarks
1. Enter system
view.
system-view N/A
2. Enter NQA test
group view.
nqa entry admin-name operation-tag N/A
3. Enter test type
view of the test
group.
type { dhcp | dlsw | ftp | http | icmp-echo | snmp | tcp |
udp-echo | udp-jitter }
N/A
4. Configure
threshold
monitoring
• Configure to send traps to the network management server
under specified conditions:
reaction trap { probe-failure consecutive-probe-failures |
test-complete | test-failure cumulate-probe-failures }
• Configure a reaction entry for monitoring the probe
duration of a test (not supported in UDP jitter tests):
reaction item-number checked-element probe-duration
threshold-type { accumulate accumulate-occurrences |
average | consecutive consecutive-occurrences }
threshold-value upper-threshold lower-threshold
[ action-type { none | trap-only } ]
• Configure a reaction entry for monitoring the probe failure
times (not supported in UDP jitter tests):
reaction item-number checked-element probe-fail
threshold-type { accumulate accumulate-occurrences |
consecutive consecutive-occurrences } [ action-type { none
| trap-only } ]
• Configure a reaction entry for monitoring packet round-trip
time (only supported in UDP jitter tests):
reaction item-number checked-element rtt threshold-type
{ accumulate accumulate-occurrences | average }
threshold-value upper-threshold lower-threshold
[ action-type { none | trap-only } ]
• Configure a reaction entry for monitoring the packet loss in
each test (only supported in UDP jitter tests):
reaction item-number checked-element packet-loss
threshold-type accumulate accumulate-occurrences
[ action-type { none | trap-only } ]
• Configure a reaction entry for monitoring one-way delay
jitter (only supported in UDP jitter tests):
reaction item-number checked-element { jitter-ds |
jitter-sd } threshold-type { accumulate
accumulate-occurrences | average } threshold-value
upper-threshold lower-threshold [ action-type { none |
trap-only } ]
• Configure a reaction entry for monitoring the one-way
delay (only supported in UDP jitter tests):
reaction item-number checked-element { owd-ds |
owd-sd } threshold-value upper-threshold lower-threshold
Configure to send
traps.
No traps are sent to
the network
management server
by default.