R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

115
To configure the history records saving function of an NQA test group:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter NQA test group
view.
nqa entry admin-name operation-tag N/A
3. Enter NQA test type
view.
type { dhcp | dlsw | ftp | http | icmp-echo |
snmp | tcp | udp-echo | udp-jitter }
N/A
4. Enable the saving of the
history records of the
NQA test group.
history-record enable
By default, history records of the
NQA test group are not saved.
5. Set the lifetime of the
history records in an
NQA test group.
history-record keep-time keep-time
Optional.
By default, the history records in
the NQA test group are kept for
120 minutes.
6. Configure the maximum
number of history
records that can be
saved for a test group.
history-record number number
Optional.
By default, the maximum
number of records that can be
saved for a test group is 50.
Configuring optional parameters for an NQA test
group
Optional parameters for an NQA test group are valid only for tests in this test group.
Unless otherwise specified, the following optional parameters are applicable to all test types.
To configure optional parameters for an NQA test group:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter NQA test group view.
nqa entry admin-name
operation-tag
N/A
3. Enter test type view of a test
group.
type { dhcp | dlsw | ftp |
http | icmp-echo | snmp |
tcp | udp-echo | udp-jitter }
N/A
4. Configure the description for
a test group.
description text
Optional.
By default, no description is available for
a test group.