R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

141
Load sharing criteria for link aggregation groups
In a link aggregation group, traffic may be load-shared across the selected member ports based on a set
of criteria, depending on your configuration.
You can choose one of the following criteria or any combination for load sharing:
• Service port numbers
• IP addresses
• IP protocols
Configuring link aggregation in the Web interface
Configuration task list
Table 14 Static aggregation group configuration task list
Task Remarks
Creating a Layer 2 static link
aggregation group
Required.
Create a static aggregate interface and configure member ports for the static
aggregation group automatically created by the system when you create the
aggregate interface.
By default, no static aggregation group exists.
Creating a Layer 3 static link
aggregation group
Displaying information about
an aggregate interface
Optional.
Perform this task to view detailed information about an existing aggregation
group.
Creating a Layer 2 static link aggregation group
Select Network > Link Aggregation from the navigation tree, and then click Create to enter the page as
shown in Figure 63.