R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

143
Figure 64 Creating a Layer 3 static link aggregation group
Table 16 shows the detailed configurations for a Layer 3 static link aggregation group.
Table 16 Configuration items
Item Descri
p
tion
Enter Link Aggregation
Interface ID.
Select Route-Aggregation to create a Layer 3 static aggregation group, and
set the aggregate interface number.
Select port(s) for the link
aggregation interface.
Select one or multiple ports to be assigned to the link aggregation group from
the chassis front panel.
You can view the result in the Summary list box at the bottom of the page.
Displaying information about an aggregate interface
Select Network > Link Aggregation from the navigation tree. The Summary tab is displayed by default,
as shown in Figure 65. T
he list on the upper part of the page displays information about all the
aggregate interfaces. When you select an aggregate interface from the list, the list on the lower part of
the page displays the detailed information about the member ports of the corresponding link
aggregation group.