R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

145
Figure 66 Network diagram
Configuration procedure
# Create static Layer 2 link aggregation group 1.
Select Network > Link Aggregation from the navigation tree, and then click Create to enter the page as
shown in Figure 67.
Figure 67 Creating Layer 2 static link aggregation
group 1
1. Select the Bridge-Aggregation option and set the link aggregation interface ID to 1.
2. Select GigabitEthernet 0/1, GigabitEthernet 0/2, and GigabitEthernet 0/3 on the chassis front
panel.
3. Click Apply.