R3721-F3210-F3171-HP High-End Firewalls High Availability Configuration Guide-6PW101

146
Layer 3 static link aggregation configuration example
Network requirements
As shown in Figure 68, aggregate the Layer 3 Ethernet ports on each firewall to form a static link
aggregation group, balancing incoming/outgoing traffic across the member ports.
Figure 68 Network diagram
Configuration procedure
# Create Layer 3 static link aggregation group 1.
Select Network > Link Aggregation from the navigation tree, and then click Create to enter the page as
shown in Figure 69.
Figure 69 Creating Layer 3 static link aggregation
group 1
1. Select the Route-Aggregation option and set the link aggregation interface ID to 1.